PMN Crop News Homepage   

Posted 31 January 2017. PMN Crop News.

Wind Speed and Herbicide Application

Source: Iowa State University Extension Article.

By Bob Hartzler, Integrated Crop Management News, and Iowa State University Extension and Outreach

Ames, Iowa (January 17, 2017)--The anticipated increase in dicamba and 2,4-D use associated with XtendTM and EnlistTM crops will require enhanced stewardship to prevent problems with off-target movement. While many factors influence herbicide drift, high wind speeds pose the greatest threat of moving herbicides off the intended target.


The labels for Group 4 herbicides approved with the new herbicide-resistant crops specify not to apply when wind speeds exceed 15 MPH. Other labels (e.g. Laudis, Cobra, etc.) specify 10 MPH as the maximum wind speed for application. Spraying when winds exceed label restrictions is not only illegal, but can override steps taken to eliminate off-target movement (e.g. low-drift nozzles, low spray pressure, etc.).

Anyone who has experienced an Iowa spray season understands the struggle in finding suitable times to apply pesticides. Wind speeds averaged over a 30-year period at three Iowa locations are displayed in Figure 1. During the day, wind intensity generally begins to increase around 7:00 a.m. and peaks around 4:00 p.m. Winds are stronger early in the growing season, and also are stronger in northwest Iowa compared to other areas of the state. The graphs illustrate how wind speed limits the time available for pesticide applications. During much of the day, average wind speeds are close to, or exceed, maximum levels specified on herbicide labels, especially early in the growing season.

The high sensitivity of certain plants to Group 4 herbicides increases the risk, and therefore liability, associated with applications of these products. The new Group 4 herbicide products clearly state preventing spray drift is the responsibility of the spray applicator. Determining wind speeds, documenting the presence of nearby sensitive plants, following label guidelines, and using good judgment is important with any pesticide application, but is essential with the new Group 4 products.



Acknowledgment: The author appreciates the assistance of Daryl Herzmann and Elwynn Taylor in developing the wind speed graphs.

Bob Hartzler